MAZDA Complaints

The contact owns a 2025 Mazda CX-70. The contact stated that the vehicle was included in a recall for the hybrid system software update and was taken to the dealer, where the update was completed. The contact stated that while driving at various speeds and coming to a stop, the vehicle lost motive power and turned off. The contact shifted to park(P) and attempted to restart the vehicle. The vehicle was able to restart after several attempts in approximately 15 minutes or more. The contact stated that one morning, the vehicle hesitated to start; however, after several attempts, the vehicle restarted. The contact stated that the vehicle had failed to restart after being driven and parked at the place of employment. The vehicle remained in the parking lot. The dealer was informed of the failure but had not diagnosed or repaired the vehicle. The contact was in the process of filing a Lemon Law claim. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 5,000.

Steering wheel is sticking at highway speeds. When going around a curve at highway speeds, steering becomes stuck, requiring additional effort to turn and keep vehicle centered in lane. Steering wheel has to be 'broken loose' by pulling it to the direction opposite of the curve. This results in the vehicle bouncing around lanes which is unsafe. The vehicle is currently at the dealer being inspected. No warnings were present.

There is a potential safety risk with the 2024 Mazda CX-90 power steering/lane keep assist. When traveling at moderate speeds steering left into a turn the vehicle jerks to the right. I do not believe this is a direct problem with the lane keep assist as the problem only occurs when in the center of the travel lane and not while on the edge of the road. Lane keep assist works as intended when on the edge of the road or on the center stripped line as I feel a gentle assist again as intended. The hard pulling to the right problem only occurs when steering left into a turn. There are no warning lights on the instrument cluster. The authorized dealer has not been able to reproduce the issue. The issue has been ongoing for at least the past six months.

The contact owns a 2012 Mazda Mazda6. The contact stated while driving 55 MPH and crossing a bridge, the vehicle stopped unexpectedly after driving over several expansion joints. The contact stated that the vehicle had not stalled. The contact exited the vehicle and noticed that the passenger’s side front wheel was slanted into the wheel well. The contact inspected the wheel well and noticed that the control arm had sheared off at the cross member. The contact stated that prior to the failure, the steering wheel had turned slightly to the right. The contact researched online and related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension), which included the VIN. The contact stated that the vehicle was towed to a dealer, where the contact was advised that the VIN was included in a recall, and the contact was advised that the vehicle needed to be diagnosed to determine the cause of the failure. The contact stated that the dealer had not diagnosed vehicle in a month. The manufacturer was informed of the failure and advised the contact to work with the dealer. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer and dealer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 188,000.

The steering is inconsistent. Sometimes it requires more or less effort to turn. The steering has been sticking around turns lately. This issue started over a year ago. They applied grease and it made the sticking go away but it has came back after 9 months.

The steering is notchy during turns when the steering wheel is off center, making fine turning adjustments very difficult especially during turns. If any bumps are encountered during a turn or any turning adjustments need to be made, the steering will catch and release and move in a different direction than expected. It requires constant adjustment but the adjustments are not smooth, there is a binding/notchy feeling. When the car is stationary, the it is clearly observed by turning the wheel slowly and feeling the vibrations or observing the continuous jumps in steering wheel. I took the car into the dealer for repair under warranty and they said the steering wheel turns side to side so it's not a problem and refused to further diagnose or make any repairs. I told them it was unsafe to drive the car as is and they said there was nothing wrong with the car so they wouldn't be doing anything more. I asked to show them what was wrong and they said they had done enough and refused to do any more diagnostics. I asked them to look into Safety Recall 6524A and said it feels a lot like what other people describe was wrong with that recall, they said the recall has already been done to this vehicle it doesn't apply, and furthermore that the recall was not an actual issue but just Mazda wanting stiffer steering feel. I now have an appointment with a different dealer to see if they will fix it since the car feels very dangerous to drive as is.

THE FRONT PASSENGER SEAT HEATING SYSTEM CAUGHT FIRE AND BURNED THROUGH THE FABRIC AND MY DOG'S SEAT. THE FUMES MADE ME AND MY DOG NAUSEOUS.I HAD TO SWERVE ACROSS THE HIGHWAY AND STOP ON THE SHOULDER TO EXTINGUISH THE SEAT FIRE/BURN. THE FUSE WAS PULLED FOR SAFETY. THE SEAT IS IN STORAGE FOR INSPECTION. MAZDA WILL BE CONTACTED.

My 2024 Mazda CX-90 continues to have a malfunctioning fuel gauge despite multiple dealer visits and the recall repair (Recall 25V568). The dealer confirmed the issue was fixed, but it is not. The digital fuel gauge does not update in real time. It remains stuck for long distances and only partially recalibrates after restarting the car. For example, on November 5, 2025, I drove more than 60 miles, but the gauge dropped by only about 10 miles. After turning the ignition off and on, the gauge adjusted slightly but still did not reflect the true fuel level. Photos from that day are attached. I have serious safety concerns. The recall notice states: “If the vehicle incorrectly indicates an inaccurate fuel level, there is a chance of unexpectedly running out of fuel while driving. This would result in an engine stall and vehicle being unable to restart, increasing the risk of a crash.” This issue persists even after the recall service was completed, suggesting that the current fix may not fully resolve the defect. This has been an ongoing issue. I visited the dealership again on Nov 5th, 2025.

The vehicle has a built in wireless phone charger. When the charger is used for for more than > 10 minutes, the phone proceeds to heat up to the point it burns your hand when you take it off the charger. I have spoken to the dealer and the service advisor says this is “normal” and occurs in a variety of car models. Then he blamed my phone, but my phone does not heat when using any other wireless or plug in charger. I am concerned that the excess heat will result in the battery exploding as we have seen with other phone charger and laptop charger devices. Perhaps they honestly do not realize this is an is an issue, but do we have to wait until someone is seriously hurt before it is addressed?

The display on my rearview camera is extremely foggy. It appears to have had a breach where water has leaked into the camera itself. I have cleaned the lens but yo no avail. I never had a clear screen, and at times it is so bad that I can’t see anything at all. In fact, I have already backed into the corner of a building in a parking lot due to lack of visibility. I can’t tell you the number of times I’ve attempted to back out and almost hit a pedestrian or another car driving behind me that I couldn’t see well. It’s a good thing I use my mirrors and rear window, or that could have easily happened. I wonder if the work that was done on my rear hatch from a previous recall may have caused the seal protecting the camera unit to be compromised. There have been a number of recalls recently from other manufacturer’s, so I believe this is a common issue that should be addressed in my case as well.