2010 MERCURY MILAN Complaints

My head lights are NOT sufficient. It does not have the option for 2 bulbs. I have changed out the bulbs 3 times while owning this vehicle and from the first night I drove it after owning it, I noticed the lights where very off. I drive around town and on dark roads where there is NO Road LIGHTS at night with my head lights on Bright and I DO NOT get brighted back. I have hit an animal due to the lights not being bright. I fear driving the car at night or where it's to dark because the light assembly is not proper. No warning lights.

So my ABS and Traction control lights came on while driving, my steering wheel became stiff, and I had ZERO brakes. I almost hit another vehicle. After being able to pull over and safely park without hurting myself and child or anyone else, I had my husband come get my car. He said that when opening the break fluid cap it was sucked down. It "fixed" itself after the cap was fixed. After a few weeks, my 16 yr old was driving and it happened to her, she pulled over, called me. I came to get her and done what my Husband said, shutting the car off, turn the break fluid cap off see if the rubber part was sucked down, and it was , to push it back up, check fluid , put cap back on, restart car. This happens every 2-3 weeks. Driving down a very steep Canyon in Colorado I feared my breaks going out on me. I looked this issue up and there is a RECALL on 2010 Mercury Milan Hybrids just NOT for particular VIN. This is a serious issue that needs to be addressed.

The contact owns a 2010 Mercury Milan Hybrid. The contact stated that after driving approximately 20 MPH and coming to a stop, excessive force was required to apply the brake pedal. The contact stated that the ABS warning light, traction control, and brake warning lights were illuminated. The vehicle was taken to an independent mechanic where the failure code U3000 for the ABS module was retrieved. The contact referenced NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) as a possible solution to the failure however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The approximate failure mileage was 139,000.

The brakes failed to stop my car a week ago. A warning brake light appeared at the same time. It happened on a street near my home before I pulled onto the highway. No one was behind me. I shut engine off and when it restarted, I was able to brake, turn around, and return home. I had car towed to repair facility who examined the brakes and determined the brakes needed software update that only Ford could do as per a recall that just appeared. I had the car towed to Ford dealership where it now sits waiting to be worked into their schedule. This had also happened a year prior backing out of my driveway. Repair facility examined the brakes then, but found no issue as brakes began working again. Other than these 2 incidents, the brakes have been operating correctly. The car is available for inspection at Ford dealer in Lenoir City. TN.

I drove my Mercury Milan to a store a few blocks from my house and when I tried to drive home, I couldn't get the steering to turn. I turned my car off and tried again and same thing. I waited a while longer, tried again, and was able to turn it. I thought it was just a fluke. A couple days later the same thing happened and a message "Power Steering Assist Fault" appeared. My husband and I then took it to our local independent mechanic. He had to replace the steering rack and pinion. He said Ford has a recall for the 2011 Milan for this same problem but not for the 2010. I do quite a bit of interstate driving and am thankful it didn't go out while I was driving at a high rate of speed or it could have been a major safety concern (as it has been for others apparently).

Oct 2019 I went to My dealer to have a tire pressure sensor replaced due to a warning message. The sensor was replaced but the warning message remained. The mechanic did further checking and said I needed a smart junction box which can affect many things such as lights turn signals heat seat belts etc. Ford said they could not repair my car because they could not get this part. I recently inquired if it was available and there is still no ETA for this part. I had to pay them up front even though none are available. Is there a way that you can get this part expedited at Ford or issue a recall as it affects warnings and safety components. This part has to be programmed by the dealer so I do not think a salvage yard part is feasible not really sure.

I received a recall notice in March 2021 that the driver airbag needs replacement, but the part is not yet available. It still is not available! I consider this dangerous and should be fixed.

I received a recall notice in March 2021 that the driver airbag needs replacement, but the part is not yet available. It still is not available! I consider this dangerous and should be fixed.

Takata recall. The contact owns a 2010 Mercury Milan. The contact received notification of NHTSA Campaign Number: 21V158000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The power steering in my car just randomly started getting really hard to steer while I was driving out of my neighborhood a few days ago. I was turning a corner and it became so hard to steer, I almost got hit by another vehicle coming really fast and I had both of my small children in my car with me. I have researched and see that a 2011 is recalled for this same exact issue but my 2010 is not. I didn’t have any warning lights come on until it started locking up. I’m so upset that this is not an issue that needs to be fixed by a recall. This is so scary for myself and for my children.