2024 TOYOTA GRAND HIGHLANDER Complaints

After coming to a stop the vehicle will not accelerate as it should. A severe loss of power as it will only advance very slowly for 10 to 15 seconds. This is always in an intersection, so it is dangerous. Seems to happen mostlyin hot weather when the A/C is on.

The car stalls or fails to accelerate from a complete stop despite adequately stepping on the gas pedal. This has left me in dangerous situations with oncoming cars as my car fails to move as expected. This issue occurs sporadically.

- Vehicle intermittently will not respond or will barely respond when accelerator is depressed from a complete stop or near (rolling) stop. I have noticed this issue mainly when A/C is on high and during hot temperatures. I reside in the Phoenix, AZ area where high temperatures have been ranging around 110-115. - This poses a safety risk when attempting to pull out onto a busy road, either turning left or right. If the gas pedal fails to respond, this could lead to a serious crash. - This issue has arisen following a recent software update that Toyota performed (under service bulletin TSB-0017-24). This update was done to correct a different issue (shifting hesitation between gears when accelerating from 0-40mph), however it seems to have negatively affected the response of the vehicle when starting up from a stop. I have not yet taken my vehicle back to Toyota with this issue, but MANY owners of the HybridMAX are experiencing this same issue as the weather temperatures have peaked. - No warning lights appear when this occurs. The problem arose shortly after I had a software update done at the dealer on June 14, 2024.

Sometimes the vehicle will be very sluggish when accelerating from a stop, it is hard to replicate, and inconsistent.

while the engine has not warmed up, when its hot and air conditioning is on high, vehicle does not respond to the gas pedal while trying to accelerate from a stop. vehicle hesitates on acceleration. i feel this is a safety problem, because i need the car to merge quickly onto the road from a stop. this hesitation could cause a bad accident. i feel like the hesitation, is the car trying to find the gear.

When accelerating from a stop, there is a hesitation or lack of power when stepping on the accelerator. Releasing the accelerator and depressing it again will get the car going. The engine also revs high at low speeds before dropping to the next gear.

The vehicle randomly won’t go when starting out from a complete stop. You can push the gas pedal to the floor and it will barely move. Almost got hit in an intersection trying to make a left turn. Toyota is aware of the problem and has a TSB and did an ECM update but the problem persists. It’s scary when it happens. Can’t trust the vehicle.

1. Transmission issues with slippage, response. Issues where when going from reverse into drive taking 2-3 seconds to engage. Issues coming from a stop to going as well whereas there’s a hesitation with propulsion. 2. Safety has been at risk numerous times when pulling into heavily trafficked areas. Response to pedal should not have a 1-2 second hesitation, but it does and it’s sporadic. Can no longer back into locations where it may be important to put it into drive and move fast, a 3 second delay is a long time when you’re not moving and someone is going 50mph in a 35. 3. Dealer reproduced the delay from reverse to drive and annotated it was “normal” behavior. 4. Dealer denies issues with transmission, brought to another where they said it was a CVT and that’s just how they are and master tech came for drive with me. He was wrong, XLE is not a CVT. They flashed it/reset it. Seemed to help with shifting issues, however it did not fix delays. 5. No warning lamps.

when moving from a full stop, the car sometimes has hesitation to move to a full speed.

**Vehicle:** Toyota Grand Highlander Hybrid Max **Issue:** On high-temperature days, when the A/C is running at full capacity, the vehicle occasionally fails to accelerate from a stop. This issue persists even after applying the recommended ECM update. **Safety Concern:** The lack of reliable acceleration poses a significant safety risk, particularly when turning across oncoming traffic or entering a busy street. This situation can leave the vehicle stalled in the path of approaching vehicles, increasing the likelihood of an accident. **Action Taken:** Applied the ECM update that is supposed to resolve the issue, but the problem persists.