MERCURY Complaints

I was driving when it felt like the vehicle was reving in park then the "wrench" icon appeared on my dash. I went a couple blocks & my vehicle felt like it wasn't shifting automatically as it should. I pulled over & turned it off. It started right back up with no lights on, I went half a block & stopped at a stop sign but while stopped the engine reved up. I was worried I was going to be in an accident. Then the "wrench" light came back on, since I was close to home I figured I'd just try to get home. About another block, the check engine light came on & was making strange noises. I kept my vehicle at about 5-10 mph & got it home. My car was very jerky.

The contact owns a 2008 Mercury Sable. The contact stated their daughter was driving at 55 mph, when the driver was approaching an intersection at a red light the driver depressed on the brake pedal and the brake pedal went straight to the floor and the vehicle could not stop causing the vehicle to hit the vehicle in front of them in the rear. The air bags did not deploy. The driver does not remember if there was any warning light illuminated on the vehicle. The crash caused damage to the front bumper and pushed in the front grill and hit the radiator of the vehicle. There were no injuries reported. A police report was filed. The contact was a former mechanic and inspected the vehicle but could not diagnose the failure, but was concern that there was an issue with anti- lock brake system. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximate 160,000.

The contact owns a 2007 Mercury Milan. The contact received notification of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

After receiving the Safety Recall Notice 19S54 in the mail, I contacted my local Ford dealership and set up an appointment. On May 24, 2021, I brought my car to the dealership for this recall. At this time, I explained that the brake pedal was going to the floor intermittently. The car had 134,880 miles on it. The Hydraulic Control Unit was inspected and supposedly passed. So the dealer flushed the brake system and replaced the cap. After leaving the dealership, the car sat for several weeks. Two weeks after driving it again, I noticed that the brake pedal was going to the floor and it was difficult to stop the vehicle. I called the dealer and set up another appointment. The dealer had me wait about two weeks. On August 2nd, I brought my car back to the dealer for the same brake issue (Safety Recall 19S54). At this time the car had 135,492 miles. Again they inspected the brakes and the Hydraulic Control Unit. This time they found the HCU Assembly to be faulty and recommend that it be replaced. However, Ford Motor Company is refusing to cover this part under the Safety Recall 19S54 because they closed the recall after the May appointment. They want us to pay over $1500 to have it fixed.

Catalytic converter FAIL, engine idles rough while in park. HIGH Loss of engine power while driving Differentials in back tires are imbalanced…timing FAIL. Steering not calibrated, drivetrain out of sync altogether. Back wheels, left and right; randomly spin & torque hard while car is already in motion on any private road, hidden road, domestic road and high capacity, high speed highway, causing vehicle to fishtail uncontrollably and dangerously, and wildly side to side potentially veering off the road which could result in death unless the driver regains proper control of vehicle. Out of sync car computer and the mechanical devices built into car do not have proper timing performed on those particular moving parts altogether. The car was not manufactured properly mechanically nor electrically altogether. Headlights & electric system etc have an incomplete recall on my vehicle. [XXX] PARTS OF THIS DOCUMENT HAVE BEEN REDACTED TO PROTECT PERSONALLY IDENTIFIABLE INFORMATION PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

At least once a month, when I pull out of my driveway and press the brake pedal it goes all the way to the floor and the car doesn't stop. This happened again on August 3rd, 2021. I have had it to the dealer for this issue and paid to have the ABS valve replaced out of pocket. Ford said the recall "didn't cover my VIN #" and they will not reimburse me. Despite having that part replaced, at significant expense, the issue still happens fairly frequently. Driving the car around the block slowly, repeatedly pumping the brakes, is the only way to temporarily resolve the issue.

The car will lose speed and I have to try to get off the highway with out being slammed by other vehicles it is extremely dangerous and I have seen lots of people are having the same problem PLEASE FIX THIS PROBLEM BEFORE WE GET KILLED

The contact owns a 2009 Mercury Milan. The contact received recall notification for NHTSA campaign number 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that the part was not yet available. The contact stated that the vehicle experienced the failure stated in the recall. The vehicle was not repaired. The manufacturer was contacted. The failure mileage was 98,000. Vin tool confirms parts not available.

There is a known issue with the cluster panel’s relay that has caused my headlights to flash off and on randomly as it malfunctions.

Driver side door jambed locked. Cannot exit the vehicle without sliding across to passenger door.