CHEVROLET Complaints

My 2023 Chevrolet Suburban equipped with the 3.0L Duramax diesel engine (LM2) has experienced a recurring engine oil leak involving the rear main seal/lower timing cover area. The vehicle has required repeated dealer repairs for substantially the same oil-leak condition, including major engine-related disassembly, but the leak has returned after repair. This is a safety concern because failure of the rear main seal or lower timing cover sealing system can result in loss of engine oil while the vehicle is being operated. A significant oil loss could potentially cause loss of oil pressure, engine damage or engine failure and resulting loss of propulsion while driving. Leaking engine oil also has the potential to contact hot engine or exhaust components, creating an additional safety concern. The problem has been inspected and confirmed by authorized GM dealerships and documented on multiple repair orders. This does not appear to be an isolated occurrence on this vehicle because substantially the same engine oil leak has required repair more than once. GM has previously issued service information, including Bulletin PIP5795, concerning rear main oil leaks on 3.0L LM2 Duramax engines where the rear main oil seal may move or become severely shifted out of position in the timing chain lower cover. I am concerned that repeated repair of this condition may not adequately address the underlying cause and that the oil leak could recur while the vehicle is being driven. I am requesting that NHTSA review complaints and repair data involving rear main seal/lower timing cover oil leaks on GM 3.0L Duramax-equipped vehicles to determine whether a broader safety-related defect exists.

Engine abruptly lost power in middle of high speed lane. I did not have enough momentum to make it to safety, totally on the shoulder, Transmission locked up, couldn’t move vehicle to safety, Extremely dangerous situation!!!

My truck has been shuttering when accelerating and hard shifts periodically. The engine is also tapping. I have right at 74000 miles. regular oil changes and maintenances.

While I was getting off the freeway, my vehicle displayed the “Service Brake Assist” warning. When I attempted to brake, the brake pedal became extremely hard and would not respond normally. The vehicle would not stop normally when I pressed the brake pedal. I was almost involved in a crash because I could not brake as expected. I had to use the emergency parking brake to help bring the vehicle to a stop and avoid a collision. Component/system: The exact failed component is UNKNOWN. Based on the “Service Brake Assist” warning and the extremely hard brake pedal, I am concerned there may be a problem with the brake-assist system, vacuum system/vacuum pump, brake booster, or related components. The vehicle is available for inspection upon request. Safety risk: This created a serious safety hazard because I temporarily could not stop the vehicle normally while exiting a freeway. I was almost involved in a crash and had to use the emergency parking brake to help stop the vehicle. Dealer/service confirmation: UNKNOWN at this time. The problem has not yet been confirmed by a dealer or independent repair facility. Manufacturer/police/insurance inspection: UNKNOWN/No inspection has been performed by the manufacturer, police, or insurance representative at this time. Warning/message: The vehicle displayed “Service Brake Assist.” The warning appeared before/during the braking problem. At the same time, the brake pedal became extremely hard and difficult to press normally. I am requesting that NHTSA investigate this incident along with other complaints involving 2018 Chevrolet Equinox vehicles experiencing “Service Brake Assist,” hard brake pedals, loss of brake assistance, and suspected vacuum-pump/brake-assist failures. I am concerned that this may be a safety-related defect that could cause a loss of braking assistance and increase the risk of a crash. I request that NHTSA determine whether further investigation or a safety recall is warranted.

Engine crank bearings failed at only 16,310 miles. Engine replaced with a new one due severe internal damage.

My 2024 Chevrolet Trax is currently operating with a suspected internal engine defect tied to active Safety Recall A242435780. On 7/27/2026, Michael Hohl Chevrolet performed the software patch for this recall. However, severe internal engine noise remains. On my official repair order, the Shop Foreman test-drove the vehicle and explicitly documented: 'suspects could be something internal will need further diagnostics. Despite this documented internal engine concern tied to a federal safety recall, GM Corporate (Case #[XXX] (tel:[XXX])) and the dealership refuse to cover the diagnostic engine teardown. GM Customer Assistance formally told me to stop driving if the noise worsens, shifting the safety liability to me while refusing to remedy the defect. A sudden internal engine failure while driving will result in an immediate loss of motive power, power steering, and braking assistance, creating a severe crash hazard. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

For about two months my 2016 Chevy Colorado has been having a random power steering and stabilitrak issue message popping up. There’s no clear reason why this happens as I can drive my truck for days/weeks and it was suddenly lose power steering. When this happens it is a serious safety issue as I can be on the highway driving fine and my power steering will just suddenly stop working. Normally, I pull over and turn my truck off for 30 seconds to 1 minute and turn it back on and the issue will go away. I had two separate scans performed on the truck and both scans showed no “current” errors but pulled up past error codes of problems with ABS system and “low voltage.” I do not drive my truck roughly and most miles are simple roads or straight highways. No rough roads or heavy water/snow/mud. I have looked online and multiple threads from other drivers of GMC Canyons around 2015/2016 and trucks like mine who have had similar issues and the Canyon has recalls concerning this but I currently have none for the Chevy Colorado so I wanted to report this issue, especially for the safety reason. I believe if my wife was driving my truck on the highway and this happened she may not be strong enough to pull off and/or turn the truck if she had needed to since it is very difficult to turn the wheel when this error occurs.

2024 Silverado ZR2 with the 6.2L engine was involved in the GM safety recall N252494003 for L87 Engine Loss of Propulsion. Vehicle taken to local dealership where inspection was performed. Passed inspection on 11/11/2025 resulting in the dealership changing to higher viscosity oil per safety recall instructions. 27,000 miles on vehicle at time of recall inspection. On 2/24/2026 was using the on ramp to get up to speed on the interstate. Got vehicle up to 70 mph and suddenly without any warning had loss of propulsion and vehicle began to decelerate quickly in front of a tractor trailer. Fortunately the semi driver was able to swerve around me as I pulled the vehicle off to the side of the road. Vehicle towed to the dealership where I purchased the truck and diagnosed with engine failure. Multiple bearings went out sending metal fragments throughout the engine. Vehicle had 28,500 miles at time of failure. Dealership had truck for roughly a month to perform complete engine replacement. Truck currently has 32,000 miles on it and seems to be running okay. We have lost some trust in the GM brand after this whole issue. Another uneasy problem is that my wife’s 2025 GM SUV has the same 6.2L engine in it. We bought my wife’s vehicle in May of last year and are unable to move out of it due to being in negative equity at the moment with that vehicle.

Seats: Driver’s seat shifts forward when normal braking pressure is applied. Bottom cushion seems to be loose/shifting. Cause for major concern if emergency braking should be needed and seat does not restrain driver Steering: Steering wheel has vibrations when driving over normal aberrations/roughness on paved roads. Accompanied by rattles and mechanical noise. Extremely annoying Suspension: Front passenger side has loud clunk from time to time on certain speedbumps/off road. Low speeds 10-15mph. Vehicle Details: 2026 Colorado ZR2, Odometer: 3176

In February of 2025, while driving my 2016 Chevy Equinox home from work, I heard a loud pop and loss of engine power a block from home. The weather conditions at the time were below freezing and light snow. After getting my vehicle home, my neighbor, who works for GM looked under my Equinox and discovered the rear main oil seal had blown and informed me this was a known issue with the GM 2.4L Ecotec engine. The GM 2.4L Ecotec engine contains a non-serviceable Positive Crankcase Ventilation (PCV) system that uses a fixed orifice built into the intake manifold instead of a replaceable PCV valve. In cold weather, moisture and vapor inside the crankcase can freeze or accumulate as sludge within this orifice. When the orifice becomes obstructed, the PCV system can no longer vent crankcase gases properly, causing internal pressure to rise significantly. This condition is most common in sub-freezing temperatures and is documented in multiple GM technical bulletins. When crankcase pressure increases beyond normal operating limits, the pressure seeks the weakest escape point, which is often the rear main seal. As pressure builds, the rear main seal can rupture suddenly, resulting in an immediate and severe oil leak. This failure can occur without warning and may lead to rapid oil loss, environmental contamination, and potential engine damage if the vehicle continues to operate. The defect is inherent to the PCV system design and is not related to owner maintenance practices. General Motors has been aware of PCV system obstruction issues in the 2.4L Ecotec engine since at least 2013, when internal service bulletins first documented rear main seal failures caused by crankcase over-pressurization in cold weather. GM issued additional bulletins in 2014, 2016, and 2019, each reiterating the same failure mechanism. In 2014, GM created Special Coverage Adjustment 14882 but many vehicles equipped with the same engine and PCV design were not added, including mine.